ETS Company
GREAT deals on Press washers, steam cleaners and more check out our new machine store at pressureparts1.com
Wednesday, September 21, 2011
Thursday, July 28, 2011
ETS Co., Inc. Launches New Website
Check out the new ETS Co. (Equipment Trade Service Company) Web Site. your 1 stop for Pressure Washers, Pressure Washer Parts, Pressure Washer Pumps, Hose Reels, Graffiti Removers, Cleaning Compounds, Wet/Dry Vacuums, Pressure Washer Accessories, and more!
Go To etscompany.com
Go To etscompany.com
Wednesday, July 27, 2011
Annovi Reverberi XT 1750 rpm N Version 24mm Solid Shaft pumps
AR - Annovi Reverberi XT 1750 rpm N Version 24mm Solid Shaft
XT 1750 Pump Break Down Click Here.
For all Annovi Reverberi Pump Breakdowns click here.
To Order Annovi Reverberi XT 1750 N Version Pumps Click here.
Max | Max | Power | Bore | Stroke | Weight | |
Model | GPM | PSI | EBHP | Dia mm | mm | Lbs. |
XTA2G15 | 2.11 | 2000 | 3 | 15 | 9.6 | 10 |
XTA2G22 | 2.11 | 2200 | 3 | 15 | 9.6 | 11 |
XTA3G16 | 3 | 1600 | 3 | 18 | 9.6 | 10 |
XTA3G19 | 3 | 1900 | 4 | 18 | 9.6 | 11 |
XTA3G22 | 3 | 2200 | 4.5 | 18 | 9.6 | 11 |
XT 1750 Pump Break Down Click Here.
For all Annovi Reverberi Pump Breakdowns click here.
To Order Annovi Reverberi XT 1750 N Version Pumps Click here.
Monday, July 25, 2011
CAT Pump - 10 Frame Piston Pump - model 623.011
CAT Pump - 10 Frame Piston Pump - model 623.011
Features
CAT Pump 623 Service Manual CLICK HERE
CLICK HERE to Order CAT Pump 623
Features
- 6.0GPM,1200PSI
- Triplex Uniflow design provides continuous forward liquid flow for
- smooth operation.
- Wetted cups and floating pistons are lubricated and cooled by
- pumped liquid for long cup life.
- Mechanically actuated inlet valves give strong lift and easy prime.
- Oil bath crankcase assures optimum lubrication.
- 100% wetted seal design allows pumped liquid to cool and lubricate
- for longer life.
- Cylinder and sleeve wear surfaces are hard chrome plated 304
- stainless steel for maximum durability and abrasion resistance.
- Chrome plated, brass manifolds and optional stainless steel
- manifolds are strong and corrosion resistant.
- Special high strength TNM connecting rods offer superior bearing
- quality strength.
- Chrome-moly crankshaft gives unmatched strength and surface
- hardness.
- Oversized crankshaft bearings with greater loading capacity mean
- longer bearing life
CAT Pump 623 Service Manual CLICK HERE
CLICK HERE to Order CAT Pump 623
CAT 650 PLUNGER PUMP
CAT 650 PLUNGER PUMP
CAT Pump 650 (plunger pump)
Features
CAT Pump 650 Plunger Pump Service manual Click Here
List Price: $3,395.34
Our Price: $2,612.71
Purchase the CAT 650 PLUNGER PUMP here
CAT Pump 650 (plunger pump)
Features
- Superior Design
- Triplex plunger design provides smoother liquid flow.
- V-Packings are completely lubricated and cooled by the liquid being
- pumped.
- Lubricated Lo-Pressure Seals provide double protection against
- external leakage.
- Oil bath crankcase assures optimum lubrication.
- Close tolerance concentricity of the ceramic plunger offers perfect
- alignment and maximizes seal life.
- Quality Materials
- All stainless steel valves are heat treated and seats are roller
- burnished for a positive seal and extended valve life.
- Bronze or Duplex Stainless Steel manifolds are strong and corrosion
- resistance.
- Special concentric, high-density, polished, solid ceramic plungers
- provide atrue wear surface and extended seal life.
- Specially formulated, CAT PUMP exclusive, V-Packings offer
- unmatched performance and seal life.
- Die cast aluminum crankcase provides high strength, minimum
- weight and precision tolerance control.
- Chrome-moly crankshaft gives unmatched strength and surface
- hardness.
- Oversized crankshaft bearings with greater loading capacity mean
- longer bearing life.
- Easy Maintenance
- Wet-end is easily serviced without entering crankcase, requiring less
- time and effort.
- Inlet and discharge valve assemblies interchange for easier
- maintenance without disturbing piping.
- Preset packings mean no packing gland adjustment is necessary,
- reducing maintenance costs.
- SECIFICATIONS
- Flow...................................................7.0 GPM (27 L/M)
- Pressure Range.....................100 to 3000 PSI (7 to 210 BAR)
- RPM ...............................................1000 RPM (1000 RPM)
- Inlet Pressure Range.................–5 to +60 PSI (–0.35 to +4 BAR)
- Bore........................................................ .787" (20 mm)
- Stroke....................................................1.181" (30 mm)
- Crankcase Capacity ..............................42 oz. (1.26 L)
- Maximum Liquid Temperature...............160°F (71°C)
- Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
- Inlet Ports (2) ..................................3/4" NPTF (3/4" NPTF)
- Discharge Ports (2).........................1/2" NPTF (1/2" NPTF)
- Pulley Mounting .............................Either Side (Either Side)
- Shaft Diameter ..................................... 1.181" (30 mm)
- Weight...................................................44 lbs. (19.9 kg)
- Dimensions.......................16.28x12.99x6.44" (413.50x330x163.50 mm)
CAT Pump 650 Plunger Pump Service manual Click Here
List Price: $3,395.34
Our Price: $2,612.71
Purchase the CAT 650 PLUNGER PUMP here
Thursday, July 21, 2011
AR - ANNOVI REVERBERI RSV4G40H-F40 PUMP
AR - ANNOVI REVERBERI RSV4G40H-F40 4GPM 4000PSI 1" GAS
The AR - Annovi Reverberi RSV4G40H-F40,
Features
List Price: $518.28
Our Price: $398.82
CLICK TO ORDER the AR - Annovi Reverberi RSV4G40H-F40
You save $119.46!
The AR - Annovi Reverberi RSV4G40H-F40,
Features
- MANIFOLD: NEW high efficiency design concept. Patented forged brass for strength and no porposity for long life and higher hydrostatic pressures
- BOLTS: Eight 6mm grade 8.8
- PLUNGERS: Ceramic coated stainless steel
- CRANKCASE: Precision die-cast cooling fins and anodized for maximum heat dissipation
- BEARINGS: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. this assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankcase from floating
- VALVES, SEATS AND SPRINGS: Stainless steel with specially designed ultra form cages to provide long life and positive seating
- SEALS AND V-PACKINGS: "V" style (D-1) buna-N strong and tightens under load
- OIL SEALS: All are constructed of Buna-N riubber
- PLUNGER RODS: Stainless steel construction for strength (no plating to scrape off) o-ring plunger sealing system
- CONNECTING RODS: One piece special alloy aluminum and bronze based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction for added load strength
- 1" gas flange hollow shaft
- Built-in adjustable unloader
- Maximum flow: 4.0 GPM 15.1 LPM
- Maximum Pressure: 4000 PSI 275 BAR
- Minimum Horsepower: 15 Gas
- Maximum temperature: 140F
- Plunger: 15mm
- Oil Capacity: 16 oz
- Inlet thread: 1/2" FPT
- Discharge thread: 3/8" FPT
- Weight: 14 lbs.
Our Price: $398.82
CLICK TO ORDER the AR - Annovi Reverberi RSV4G40H-F40
You save $119.46!
Wednesday, July 20, 2011
GIANT PUMP GXRH 2224
GIANT PUMP GXRH 2224
Horizontal/Vertical Pump with built-in Regulator, Thermal Relief Valve and Siphon Injector.
Specifications
Model GXR Series
GXR2224..............................................................................................2.2 GPM @ 2400 PSI
Maximum Inlet Pressure.......................................................................Up to 90 PSIG1
RPM......................................................................................................3450
Plunger Diameter ..................................................................................16mm
Stroke GXR2224 ..................................................................................4.7mm (6.1 o angle)
Crankcase Oil Capacity ........................................................................4.7 fl. oz. (4.1 fl.oz. horizontal)
Temperature of Pumped Fluids ............................................................Up to 80 oF
Inlet Port ...............................................................................................1/2" NPT
Discharge Ports .....................................................................................3/8" NPT
Shaft Rotation .......................................................................................Either Direction2
Weight...................................................................................................9 lbs.
Width ....................................................................................................8.325"
Height ...................................................................................................6.45"
Swash Plate Bore (Horizontal) .............................................................3/4" x 3/16" Keyway
Swash Plate Bore (Vertical) ..................................................................7/8" x 3/16" Keyway
Valve Type ............................................................................................Polyamide Plastic
1 A 25 PSIG minimum inlet pressure is required.
2 The pump itself can be driven in either direction of rotation; however, the cooling fan
on TEFC motors must always be positioned so that the cooling air is drawn from the
non-drive end of the motor towards the pump.
CLICK HERE FOR GXR PUMP BREAKDOWN
List Price: $260.00
Our Price: $200.07
You save $59.93!
CLICK HERE TO PURCHASE THE GXR GIANT PUMP
Horizontal/Vertical Pump with built-in Regulator, Thermal Relief Valve and Siphon Injector.
Specifications
Model GXR Series
GXR2224..............................................................................................2.2 GPM @ 2400 PSI
Maximum Inlet Pressure.......................................................................Up to 90 PSIG1
RPM......................................................................................................3450
Plunger Diameter ..................................................................................16mm
Stroke GXR2224 ..................................................................................4.7mm (6.1 o angle)
Crankcase Oil Capacity ........................................................................4.7 fl. oz. (4.1 fl.oz. horizontal)
Temperature of Pumped Fluids ............................................................Up to 80 oF
Inlet Port ...............................................................................................1/2" NPT
Discharge Ports .....................................................................................3/8" NPT
Shaft Rotation .......................................................................................Either Direction2
Weight...................................................................................................9 lbs.
Width ....................................................................................................8.325"
Height ...................................................................................................6.45"
Swash Plate Bore (Horizontal) .............................................................3/4" x 3/16" Keyway
Swash Plate Bore (Vertical) ..................................................................7/8" x 3/16" Keyway
Valve Type ............................................................................................Polyamide Plastic
1 A 25 PSIG minimum inlet pressure is required.
2 The pump itself can be driven in either direction of rotation; however, the cooling fan
on TEFC motors must always be positioned so that the cooling air is drawn from the
non-drive end of the motor towards the pump.
CLICK HERE FOR GXR PUMP BREAKDOWN
List Price: $260.00
Our Price: $200.07
You save $59.93!
CLICK HERE TO PURCHASE THE GXR GIANT PUMP
Subscribe to:
Posts (Atom)