EZ Series 4040G General Pump
• Standard SAE J609 gasoline mounting flange for
up to 13 hp engines
• Forged brass manifold with an exclusive lifetime
warranty and 3:1 hydrostatic rating
• Die-cast, anodized aluminum oil-bath crankcase
• Innovative one-piece plunger design to eliminate
water entering crankcase
• Premium roller bearing
• 5% reduction in crankcase load compared to
standard 3,000 PSI, 15 mm pumps
• Unitized stainless steel inlet and discharge valves
• Available in “L” left-handed versions
General Pump Model EZ4040G
Maximum Volume 4.0 GPM 3.5 GPM 3.0 GPM
Maximum Discharge Pressure 4000 PSI
Maximum Pump Speed 3400 RPM
Maximum Inlet Pressure 125 PSI
Maximum Inlet Vacuum 3 ft. water (2.6 in. Hg)
Plunger Bore .512 in. / 13 mm
Plunger Stroke .512 in. / 13 mm .433 in. / 11 mm .374 in. / 9.5 mm
Crankcase Oil Capacity 14.0 oz.
Maximum Fluid Temperature 165o F
Inlet Port Thread 1/2-14 BSPP-F
Discharge Port Thread 3/8-19 BSPP-F
Shaft Diameter 1.0 in. / 25.4 mm
Weight 20 lbs.
Dimensions 8.8” x 9.7” x 6.5”
General Pump Model EZ4040G
List Price: $503.34
Our Price: $387.32
ALSO Spring is here, get a jump start on all your pressure washer and graffiti removal needs at ETS Co use code spring11 at check out BEFORE MAY 31st for 15% off your entire order!
• Standard SAE J609 gasoline mounting flange for
up to 13 hp engines
• Forged brass manifold with an exclusive lifetime
warranty and 3:1 hydrostatic rating
• Die-cast, anodized aluminum oil-bath crankcase
• Innovative one-piece plunger design to eliminate
water entering crankcase
• Premium roller bearing
• 5% reduction in crankcase load compared to
standard 3,000 PSI, 15 mm pumps
• Unitized stainless steel inlet and discharge valves
• Available in “L” left-handed versions
General Pump Model EZ4040G
Maximum Volume 4.0 GPM 3.5 GPM 3.0 GPM
Maximum Discharge Pressure 4000 PSI
Maximum Pump Speed 3400 RPM
Maximum Inlet Pressure 125 PSI
Maximum Inlet Vacuum 3 ft. water (2.6 in. Hg)
Plunger Bore .512 in. / 13 mm
Plunger Stroke .512 in. / 13 mm .433 in. / 11 mm .374 in. / 9.5 mm
Crankcase Oil Capacity 14.0 oz.
Maximum Fluid Temperature 165o F
Inlet Port Thread 1/2-14 BSPP-F
Discharge Port Thread 3/8-19 BSPP-F
Shaft Diameter 1.0 in. / 25.4 mm
Weight 20 lbs.
Dimensions 8.8” x 9.7” x 6.5”
General Pump Model EZ4040G
List Price: $503.34
Our Price: $387.32
ALSO Spring is here, get a jump start on all your pressure washer and graffiti removal needs at ETS Co use code spring11 at check out BEFORE MAY 31st for 15% off your entire order!
Equipment Trade Service Co. Inc.has been providing Industrial Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.